What To Do If Your Water Heater Unexpectedly Stops Working
What To Do If Your Water Heater Unexpectedly Stops Working
Blog Article
Do you find yourself trying to find advice concerning What Would Cause My Electric Water Heater to Stop Working??
Lots of modern residences utilize an electrical water heater for their furnace, because of its comfort and simplicity of use. Nonetheless, just like any other electric appliances, issues may develop with its use, suddenly. It can be actually frustrating to awaken to a cool shower rather than a warm one or having your bath with water that isn't warm enough and even also hot. Whatever the case may be, water heater issues can be rather aggravating. The good news is, we've made a list of possible solutions to your water heater problems. There are a variety of aspects that can create most of these problems, it could be an issue with the power supply, the electrical heating element, or the thermostat. Before doing anything, ensure you turn off the main power supply for security. Whatever the issue is, getting it repaired must not present excessive of a problem if you comply with these steps:
Check Your Power Supply:
As basic as this may seem, it is very necessary. Without adequate power, your water heater will not function. So the first thing to do when your water suddenly stops working is to validate that it isn't a power trouble. Examine if the fuse is burnt out or the breaker tripped. If the circuit breaker is the issue, simply turn it on and off once more. Change any type of damaged or worn-out fuse. Test the appliance with power after these adjustments to see if it's currently working.
Check the Heating Element in the Hot Water Heater:
If it's not a power issue, then try checking out your burner if it is still functioning. Check each of your heating elements to be sure the trouble isn't with any one of them. If any one of them is defective, replace that component and afterwards inspect whether the hot water is back on.
Examine Your Thermostat:
If your hot water heater still isn't working or the water coming out isn't warm sufficient, you might need to check the temperature level setups on your upper thermostat. Ensure the breaker is turned off before doing anything. Open up the gain access to panel and press the red switch for temperature level reset above the thermostat. This should aid heat up the water. Turn the breaker back on as well as check if the trouble has been resolved.
Call A Specialist:
If after replacing all faulty components and resetting your temperature level, the hot water heater still isn't working, you might need to speak to a professional plumber for a professional point of view. The issue with your heater could be that the cold and hot taps have actually been changed or it might be undersized for the amount of warm water needed in your home. Whatever the situation may be, an expert plumber would aid resolve the trouble.
Final thought
Hot water heater issues are not constantly major. Most of them are because of minor problems like a blown fuse or worn-out burner. Changing the defective components ought to suffice. Nevertheless, if you are still incapable to resolve the trouble, give a call to your nearest plumber to find to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I hope you liked our section on How to Troubleshoot and Repair an Electric Water Heater. Thank you so much for taking time to read our posting. Appreciated our write-up? Please share it. Let someone else check it out. Thanks a bunch for your time. Please check up our site back soon.
Schedule Estimate
Report this page